Pulse generator for UNICO®, MTK, MTW & MTH
Pulse generator IPG 14
Categorías de productos
Pulse generator for UNICO®, MTK, MTW and MTH
Agua
Agua potable
Ingeniería de sistemas
Cableado
Impulse
Smart City
Smart Building
Sus ventajas
- Determination of continuous flow rate:
Reliable process control - Integrated protective resistance:
Protection against overload
Aplicaciones
- The pulse generator IPG14 found in GWF volume measuring parts is a component of heat meters and GWF water meters for remote indication, pulse collectors, pulse processing systems / long term pulse acquisition systems and frequency converters.
Descargas
Características
- Low frequency pulse generator
- Potential free Reed contact
- Variety of pulse values available
- High switching cycle number
- Protection class IP67
Product information
Technical data
| Switching element | Reed | |
|---|---|---|
| Switching voltage | Umax | max. 42 V AC/DC |
| Switching current | Imax | 100 mA |
| Switching capacity | Pmax | 4 W |
| Resistor | R | 18 Ohm |
| Conductor cross section | 0,14 mm2 | |
| Switching cycles | app. 107 | |
| Meter | Cable length | Isolation | Thermal limits |
|---|---|---|---|
| UNICO® | 1,5 m / 3 m | PVC grey | max. 90 °C |
| MTK, MTW | 1,5 m, 3 m, 5 m | PVC grey / TPE grey | max. 90 °C /max. 130 °C |
| MTH | 1,5 m, 5 m | TPE grey | max. 130 °C |
Pulse value table
| Meter type | Size: qp/Qn | Size: Q3 | Pulse value (1 Pulse = …liter) | |||||
|---|---|---|---|---|---|---|---|---|
| UNICO® | 0,6-1,5 | 1-2,5 | - | 0,25 | 1 | 2,5 | 10 | 25 |
| UNICO® | 2,5 | 4 | 1 | 2.5 | 10 | 25 | 100 | 250 |
| MTK, MTW, MTH | 1,5-6 | 2,5-10 | 11) | 2,5 | 10 | 25 | 100 | 250 |
| MTK, MTW, MTH | 10-15 | 16-25 | - | 2,5 | 10 | 25 | 100 | 250 |
1)Nur Messbereich 1:25 / R40 verfügbar
Application
Connection scheme
Installation – Recommendations
Continuous contact
The Reed switch emits pulses of varying length depending on the water meter flow rate. Continuous contact can also occur when the roller counter is standing still. Connected devices must be able to withstand continuous contact or protective measures must be provided (wiping contact).
Long cable distances
For cable distances greater than 100 m without signal amplifier, we recommend the use of shielded and twisted cables.
See cable recommendations for electricians - BAe20603
Pulse transmission interference
In case of interference during the pulse transmission between the pulse generator and the pulse receiver, (i.e. cable is in the same duct as power cable), we recommend shielded and twisted cables.